22/02/2009 - Putting together the leading edge and attaching to spar

Putting together the leading edge is a reasonable process to go through, the odd rivet had to be drilled out, as the ones right on the leading edge are a little tricky when your doing the hammer and bucking bar job yourself.  The gun keeps slipping.

Anyway it got done and then place onto the spar and clecoed.  There was enough time to do a few of the ribs, but I turned my attention to the inspection hatch on the fuel and got that sealed up.  Leak testing for the tank next once its been in the house for a few days to harden.